- First we ned to update the Firmware on the Jetson Orin Nano. If you are not sure which one you have. Recommend the follow step 2 to upgrade firmware to 36.x or greater. Otherwise, skip to step 4.
- In the following link for the Jetson Orin Nano Jetpack 5.13 firmware from step 2.1 (You can follow all the steps from this link and skip to step 5).
- Download the 5.13 Jetpack and follow step 2 in the dowload for your operating system. Make sure to flash with the Jetpack 5.13 firmware and not Jetpack 6.x.
- You need to download Balena Etcher in the guide as well. This flashes the SD card with the firmware. You may need other software depending on your operating system.
- Then follow all the steps in write image to micro SD card. Make sure to download latest Jetpack (currently v6.1).
- Once the install Jetpack on top of the Jetson Linux:
apt install nvidia-jetpack